Notice: You are browsing the documentation for PrestaShop 9, which is currently in development.

You might want to read the documentation for the current version, PrestaShop 8. Read the current version of this page

Behat testing

It is important that you get familiar with the Behats principles before reading further. You can find the official behat documentation here.

A behaviour (behat) tests are a part of integration tests. They allow testing how multiple components are working together. In PrestaShop, behats are used to test the Application and Domain layer integration - basically all the CQRS commands and queries.

Database

Global dump

During behat tests the actual database queries are executed, therefore before testing you need to run a command composer create-test-db to create a test database.

The create-test-db script installs a fresh prestashop with fixtures in a new database called test_{your database name} and dumps the database in your machine /tmp directory named ps_dump_database_name_8.0.0.sql. That ps_dump_database_name_8.0.0.sql is later used to reset the database. You can check the actual script for more information - /tests/bin/create-test-db.php.

Tables dump

During the test database creation a global dump is created, but some dumps for each table are also created, and a checksum of each table is also performed for each table. So for product table, for example, you will get two files in your /tmp folder:

  • ps_dump_database_name_8.0.0_ps_product.sql: contains the dump that allows to clean and restore all the data in product table
  • ps_dump_database_name_8.0.0_ps_product.md5: the Checksum value (returned by MySQL function) after the test database has been installed with fixtures data

With those two files it is possible to:

  • restore a specific table independently instead of restoring the whole database
  • compare the current checksum with the saved one to pre-check if a restore is needed

This allows restoring the DB fixtures more efficiently and more quickly.

Restore commands

When testing behat scenarios it might be useful to sometimes restore the initial database content (because some scenarios messed with the current content or any other reason). In those case two composer commands are available:

  • composer restore-test-db: drop the whole database and restore its whole content with a single dump (safer but longer)
  • composer restore-test-tables: check for each table if it was modified, when necessary drop the table and restore the table content (faster, recommended)
These composer methods are useful when testing a feature only during development. But in the end each scenario is responsible for setting the database correctly and, most of all, cleaning it after it is over. ALWAYS leave the database in the state it was previously. So each feature must handle database restoration dedicated steps or custom hooks (see below).

Behats structure in PrestaShop

Behat related files are located in tests/Integration/Behaviour/. This directory contains following files:

  • behat.yml - this is the test suites configuration file which describes feature paths and contexts for every test suite. It can be passed as an argument when running the tests like this ./vendor/bin/behat -c tests/Integration/Behaviour/behat.yml.
  • bootstrap.php - this file loads the Kernel for a behat tests environment.
  • Features - this directory contains all the Scenarios and Contexts. More about it below.

Features

Before continuing, please read the official behat documentation about the features and scenarios.

In PrestaShop all *.feature files are placed in .tests/Integration/Behaviour/Features/Scenario. Each feature is placed in a dedicated directory organized by domain (or even a subdomain if necessary). These feature files contains text that describes the testing scenarios in a user-friendly manner, each of them must start with a keyword Feature and have a one or multiple scenarios starting with a keyword Scenario. For example:

Feature: Update product status from BO (Back Office)
  As an employee I must be able to update product status (enable/disable)

  Scenario: I update standard product status
    Given I add product "product1" with following information:
      | name[en-US] | Values list poster nr. 1 (paper) |
      | type        | standard                         |
    And product product1 type should be standard
    And product "product1" should be disabled
    When I enable product "product1"
    Then product "product1" should be enabled
    When I disable product "product1"
    Then product "product1" should be disabled

As you can see, we state the given information, then we describe the action and finally the assertion. These scenarios should be easy to understand even for non-technical people. So when writing one, try to avoid the technical keywords and make it as user-friendly as possible.

There is also a keyword Background, which allows running certain code before each scenario. See more here.

Every line in scenario has a related method defined in a Context.

Context

The behat Context files are classes that contains the implementations of the features. In PrestaShop all Context files are placed in tests/Integration/Behaviour/Features/Scenario.

The most recent Context files are located in Tests/Integration/Behaviour/Features/Context/Domain namespace, so try to use these and avoid the ones from the Tests/Integration/Behaviour/Features/Context/* namespace (those are old and might not be implemented well).

When creating a new Context class, it should extend the AbstractDomainFeatureContext.

The AbstractDomainFeatureContext contains some commonly used helper methods, and it implements the Behat\Behat\Context which is necessary for these tests to work.

This is how the context looks like:

class OrderFeatureContext extends AbstractDomainFeatureContext
{
//    ...
    /**
     * @Given I add order :orderReference with the following details:
     *
     * @param string $orderReference
     * @param TableNode $table
     */
    public function addOrderWithTheFollowingDetails(string $orderReference, TableNode $table)
    {
        $testCaseData = $table->getRowsHash();

        $data = $this->mapAddOrderFromBackOfficeData($testCaseData);

        /** @var OrderId $orderId */
        $orderId = $this->getCommandBus()->handle(
            new AddOrderFromBackOfficeCommand(
                $data['cartId'],
                $data['employeeId'],
                $data['orderMessage'],
                $data['paymentModuleName'],
                $data['orderStateId']
            )
        );

        SharedStorage::getStorage()->set($orderReference, $orderId->getValue());
    }
    
//    ...

As you can see in example, the string @Given I add order :orderReference with the following details: maps this method to related line in *.feature file. The :orderReference acts as a variable which actually is the id of the order, that is saved into the SharedStorage. The TableNode $table is a specific argument, you can read about it here.

Shared storage

The SharedStorage is responsible for holding certain values in memory which are shared across the feature. The most common usage example is the id reference - we specify a certain keyword e.g. product1 before creating it, and once the command returns the auto-incremented value, we set it in shared storage like this SharedStorage::getStorage()->set($orderReference, $orderId->getValue());. In upcoming scenarios we can reuse this reference to get the record, something like this:

    protected function getProductForEditing(string $reference): ProductForEditing
    {
        $productId = $this->getSharedStorage()->get($reference);

        return $this->getQueryBus()->handle(new GetProductForEditing(
            $productId
        ));
    }

Hooks

Behats allow you to use hooks. You can find some usages in CommonFeatureContext. You can use these hooked methods by tagging them before the Feature (or before Scenario depending on the hook type), like this (add_product.feature ):

@clear-cache-before-feature
@clear-cache-after-feature
Feature: Add basic product from Back Office (BO)
  As a BO user
  I need to be able to add new product with basic information from the BO

You can also tag specific features if you want to run only them with a --tags filter. For example, if you add following tag in your Feature:

@add
Feature: Add basic product from Back Office (BO)
  As a BO user
  I need to be able to add new product with basic information from the BO
    ...

Then you can run only this feature by following command ./vendor/bin/behat -c tests/Integration/Behaviour/behat.yml -s product --tags add

Restore and clear

Each feature is responsible for handling its own data and the database state, on startup you should assume that the database is in the same state as when it was created with fixtures. To assume that you need to take responsibility for cleaning it after the feature or the suite is over. There are several ways of restoring/cleaning the database. Sometimes clearing the cache of the software is also needed since all the behat suites are run in a single process.

Restore step by step

@add
Feature: Add basic product from Back Office (BO)
  As a BO user
  I need to be able to add new product with basic information from the BO

  Scenario: I modify stuff in product tables I clean them afterwards
     ...
     # You don't need to specify the database prefix, tables are separated by a comma
     Then I restore tables "product,product_attributes"
// Class Tests\Integration\Behaviour\Features\Context\CommonFeatureContext
class CommonFeatureContext extends AbstractPrestaShopFeatureContext {
    /**
     * @Given I restore tables :tableNames
     *
     * @param string $tableNames
     */
    public function restoreTables(string $tableNames): void
    {
        $tables = explode(',', $tableNames);
        DatabaseDump::restoreTables($tables);
    }
}

Restore all tables with generic tag

@restore-all-tables-before-feature
@add
Feature: Add basic product from Back Office (BO)
  As a BO user
  I need to be able to add new product with basic information from the BO
// Class Tests\Integration\Behaviour\Features\Context\CommonFeatureContext
class CommonFeatureContext extends AbstractPrestaShopFeatureContext {
    /**
     * This hook can be used to flag a feature for database hard reset
     *
     * @BeforeFeature @restore-all-tables-before-feature
     */
    public static function restoreAllTablesBeforeFeature()
    {
        DatabaseDump::restoreAllTables();
        require_once _PS_ROOT_DIR_ . '/config/config.inc.php';
    }
}

Restore a domain with specific tag

@restore-products-before-feature
@add
Feature: Add basic product from Back Office (BO)
  As a BO user
  I need to be able to add new product with basic information from the BO
// Class Tests\Integration\Behaviour\Features\Context\Domain\Product\CommonProductFeatureContext
class CommonProductFeatureContext extends AbstractPrestaShopFeatureContext {
    /**
     * @BeforeFeature @restore-products-before-feature
     */
    public static function restoreProductTablesBeforeFeature(): void
    {
        static::restoreProductTables();
    }

    private static function restoreProductTables(): void
    {
        DatabaseDump::restoreTables([
            'product',
            'product_attachment',
            'product_attribute',
            // And many more but it's not the point here
        ]);
    }
}

Restore a whole suite

This hook is triggered just by associating the context class to your suite (see behat configuration below).

// Class Tests\Integration\Behaviour\Features\Context\Domain\Product\CommonProductFeatureContext
class CommonProductFeatureContext extends AbstractPrestaShopFeatureContext {
    /**
     * @BeforeSuite
     */
    public static function restoreAllTablesBeforeSuite(): void
    {
        DatabaseDump::restoreAllTables();
    }

    /**
     * @AfterSuite
     */
    public static function restoreProductTablesAfterSuite(): void
    {
        static::restoreProductTables();
        LanguageFeatureContext::restoreLanguagesTablesAfterFeature();
    }
}

Clear cache

@clear-cache-before-feature
@clear-cache-after-feature
@add
Feature: Add basic product from Back Office (BO)
  As a BO user
  I need to be able to add new product with basic information from the BO

  @clear-cache-before-scenario
  Scenario: I test something but I make sure cache is cleared before startying this scenario
// Class Tests\Integration\Behaviour\Features\Context\CommonFeatureContext
class CommonFeatureContext extends AbstractPrestaShopFeatureContext {
    /**
     * @AfterFeature @clear-cache-after-feature
     */
    public static function clearCacheAfterFeature()
    {
        self::clearCache();
    }

    /**
     * @BeforeFeature @clear-cache-before-feature
     */
    public static function clearCacheBeforeFeature()
    {
        self::clearCache();
    }

    /**
     * @BeforeScenario @clear-cache-before-scenario
     */
    public static function clearCacheBeforeScenario()
    {
        self::clearCache();
    }

    /**
     * Clears cache
     */
    private static function clearCache(): void
    {
        Address::resetStaticCache();
        Cache::clear();
        Carrier::resetStaticCache();
        Cart::resetStaticCache();
        // And many more but it's not the point here
    }
}

Reboot kernel

@reboot-kernel-after-feature
@add
Feature: Add basic product from Back Office (BO)
  As a BO user
  I perform many modification is Symfony services so I reboot the kernel to reset everything for the following features

  Scenario: I test something that impacts CLDR, make a modification and test again I need to reset the service by resetting the whole kernel
    ...
    When I reboot kernel
    ...
// Class Tests\Integration\Behaviour\Features\Context\CommonFeatureContext
class CommonFeatureContext extends AbstractPrestaShopFeatureContext {
    /**
     * This hook can be used to flag a feature for kernel reboot
     *
     * @AfterFeature @reboot-kernel-after-feature
     */
    public static function rebootKernelAfterFeature()
    {
        self::rebootKernel();
    }

    /**
     * @Given I reboot kernel
     */
    public function rebootKernelOnDemand()
    {
        self::rebootKernel();
    }
}

behat.yml

When you have already created features and contexts it is time to map them with the test suite. The mapping is done in the behat.yml configuration file. It looks like this:

default:
    suites:
        customer:
            paths:
                - %paths.base%/Features/Scenario/Customer
            contexts:
                - Tests\Integration\Behaviour\Features\Context\CommonFeatureContext
                - Tests\Integration\Behaviour\Features\Context\CustomerManagerFeatureContext
                - Tests\Integration\Behaviour\Features\Context\Domain\CustomerFeatureContext
                - Tests\Integration\Behaviour\Features\Context\CustomerFeatureContext
                - Tests\Integration\Behaviour\Features\Context\Configuration\CommonConfigurationFeatureContext
                - Tests\Integration\Behaviour\Features\Transform\StringToBoolTransformContext
        category:
            paths:
                - %paths.base%/Features/Scenario/Category
            contexts:
                - Tests\Integration\Behaviour\Features\Context\CommonFeatureContext
                - Tests\Integration\Behaviour\Features\Context\CategoryFeatureContext
                - Tests\Integration\Behaviour\Features\Context\Domain\CategoryFeatureContext

As you can see, you have to define the suite, the path to features, and all the necessary contexts. According to the example, when you run the following: ./vendor/bin/behat -c tests/Integration/Behaviour/behat.yml -s customer - all the *.feature files from tests/Integration/Behaviour/Features/Scenario/Customer directory will be used to execute the related methods in all the provided contexts.